Smart solutions: Fixing the iPhone stuck on Apple logo and iPhone error 4013

iPhone user

This is one of the most common errors faced by iPhone users. You restart the phone and it gets stuck on the splash screen.

It’s frustrating and worrisome because it won’t go past that screen for hours and your phone starts heating up too.

If you are facing a similar issue, worry no more. This post contains all the possible solutions for the iPhone Stuck on Apple logo and iPhone error 4013.

But before we proceed, let’s try and understand a few things about iPhone stuck on apple logo. The reason why your iPhone or iPad won’t go past the Apple logo is that when you start your device, it conducts a self-test. It checks all its files and the hardware components before booting up. If something is missing or any hardware is a malfunction, it gets stuck on the splash screen.

Sometimes, we tinker with our iPhones in ways that are not recommended. This includes jailbreaking the device, installing foreign hardware components, or upgrading the iOS firmware through incomplete files, etc. People think that if a hack has worked for their friends, it will work for them too. This can’t be further from the truth. Apple is always looking into ways to stop these hacks and if you have a new device tinkering with it may cause you a lot of money. So, here are all the ways through which you can fix your iPhone device without having to go to the nearest Apple-authorized repair store.

Fixing iOS issues using a third-party tool

Perhaps the best way to fix iPhone stuck at Apple logo screen is to use third-party software. These software solutions are designed to take the worry out of the entire process. All you have to do is to plug-in your device to your computer and run software such as Dr.Fone – System Repair (iOS). There are many other similar solutions available in the market, but this software can help you repair iOS system without losing data.

If your phone is stuck at the splash screen you can easily use the different modes of this software to fix this issue. The best thing about this automated repairing system is that it supports all sorts of Apple devices and iOS versions. If you have iPhone 11/11 Pro/11 Pro Max, you can use this software without giving the idea a second thought. This tool is adept at fixing iTunes/iPhone error 4013 without harming any data saved on your iPhone. The software is very user-friendly and you can easily use it without getting lost in complex procedures.

Fixing iPhone stuck on Apple logo by force restarting the iPhone

If your iPhone stuck on Apple logo, one of the simplest solutions that you can try is to force restart your device. This solution is great because it solves numerous other frequent problems that come with iOS devices.

If you are force resetting the iPhone 6/6s or earlier models, you can start with pressing the ‘Power’ button and the ‘Home’ button together for 8-10 seconds. You will see the Apple logo and you don’t have to get scared of it. Just release the buttons when you see this screen and your iPhone will be reset. It’s the same procedure with iPhone 7.

If you are using iPhone 8 or later models the process is a bit different. To reset the device, you have to press the ‘Volume Up’ button and quickly release it. Following this, you have to press the Now ‘Volume Down’ button immediately and then press and hold on to the ‘Power’ button until you see the Apple logo on the screen. This will reset your iPhone 8 and later models.

Fixing iPhone/iTunes error 4013 using Recovery Mode

This is the last tip that we have on our list to solve the error that prevents your iPhone from going past the Apple logo screen, so read it carefully. You can try to fix the iPhone error 4013 using iTunes and putting the device in the recovery mode. We know it sounds a bit difficult, but it’s actually quite easy. Please note that this method will erase all the data in your iPhone, so make backups before you attempt it. If this solution doesn’t work then there is a high chance that something may be wrong with your hardware. But before you go to get your iPhone’s hardware checked, here are the steps of fixing the iTunes error 4013 using the recovery mode.

  • Download and install the latest iTunes version on your Mac/PC and open it.
  • Connect your iPhone device and restart it. You can force restart your device as well but make sure that you don’t release the buttons when you see the Apple logo screen. Wait until you see the ‘Connect to iTunes’ screen and then release the buttons.
  • Once you see the ‘Connect to iTunes’ screen it would mean that your iPhone has been detected by iTunes in recovery mode. You will now see a pop-up window with two options on it. You need to click on ‘Restore’ and confirm the action. Once the loading completes, you’ll see that your problem has been fixed.

This was the solution of error 4013 using the iTunes recovery mode. If this solution doesn’t work for you, we recommend that you refrain from tinkering any further with your phone and seek professional help. You can take it to the nearest Apple-authorized repair store and have it fixed there. It may cost you a lot of time and money, but it will solve your problem.

If you still want to save your time and money, we’ll advise you to get the professional software to restore your iPhone to its previous working condition. The software mentioned earlier is easy to use and you don’t have to be too tech-savvy to make the most use of it. We hope these solutions were beneficial for you and you learned something worthwhile from this article.